TOBOND PVDF ALUMINIUM COMPOSITE PANEL
TOBOND PVDF plus Aluminium Composite Panel is special metal surface wall cladding material, compounded with superior aluminum and LDPE Plastic.
ADVANTAGES OF TOBOND ACP
1.High strength, easy maintenance, 20 years not color fade.
2.Easy fabrication and installation.
3.Good Impact Resistance.
4.Light weight and rigid, reducing buildings load, good performance for quakeproof.
5.Good Smoothingness.
6.Various color and size for option.
TOBOND ACP Application
• Outer wall cladding, curtain wall.
• Redecoration of old buildings outer-wall.
• Balconies, indoor partitions.
• Units wall cladding
• Advertisement signboard
• Kitchen Cabinet surfacing decoration
• Industrial Usage, Vehicle bodies.
COLOR CHART:
Series | Coating | Usage | Panel Thickness | Panel Size(mm) |
---|---|---|---|---|
PVDF Plus Outdoor Panel | PVDF | Exterior Wall Cladding | 4mm/3mm | 1220×2440 1220×2900 1200×2400 |
Indoor panel | Polyester | Interior Decoration Advertisement board | ||
Fireproof panel | PVDF/Polyester | Exterior Wall Cladding Interior Decoration | ||
Special Size For Option | 6mm/5mm | 1250×2900 1500×2900 1500×5800 |
TEST REPORT FOR TOBOND ALUMINIUM COMPOSITE PANEL
Test Item | Test Standard"Aluminium Composite Panel"GB/T17748-2008 | ||||
---|---|---|---|---|---|
Appearance Quality | Test Item | Standard | Test Result | Verdict | |
1 | Vestige | Indistinct | Indistinct | Elighible | |
2 | Coating Omit | Not Allowed | No | Elighible | |
3 | Ripples | Not Allowed | No | Elighible | |
4 | Rubbles | Not Allowed | No | Elighible | |
5 | Flaw | ≤3pcs/m2≤3个/m2 | No | Elighible | |
6 | Abrasion | Not Allowed | No | Elighible | |
7 | Scratch | Not Allowed | No | Elighible | |
8 | Aberration | Indistinct | Indistinct | Elighible | |
Part Test Dimensions Deviation | 9 | Length/Width | ±3mm/±2mm | 0~2mm | Elighible |
10 | Alu Thickness | ±0.02mm | 0.5±0.02mm | Elighible | |
11 | Total Thickness | ±0.2mm | 4mm±0.05mm | Elighible | |
12 | Diagonals windage | ≤5mm | ≤3mm | Elighible | |
13 | Warpage | ≤1mm/m | ≤0.5mm/m | Elighible | |
14 | Warpage | ≤5mm/m | ≤3mm/m | Elighible |
PROCEEDING NOTICED
1.Portage: panel must be uplifted with its four borders at the same time during portage, do not drag and whop for fear scraping surface of the panel.
2.Storage: panel must be stored in cool dry place, and placed on flat surface.
3.Notching: if notching with notching equipment or gong equipment, using milling cutter with half round head≥90 degree. When notching, pls leave 0.2—0.3mm thickness plastic core materials bending with aluminium sheet to increase intension and tenacity, otherwise aluminium sheet may rupture or coating crack.
4.Bending: forcing equably when bending, molding one-off, do not bend again and again, or Aluminium panel may rupture.
5.Arcing Machining: using professional bending equipment to machining, forcing inchmeal to make the panel reaching bending radian needed. Do not bending one-off.
6.Batch: same color panel from different batches may have chromatic aberration, contrast process of chromatic aberration should be added if selling or using panels with different batches panels. Panels can be placed on a plane only there may be visual chromatic aberration.
7.Installation direction: panels must be install in same direction.
8.Ripping film: the protective film should be ripped away within 45 days after installation, to avoid survivors left.
9.Cleaning: clear the panel with water, scours or alcohol over 98% with soft sponge. Do not use Chemical Solvents.
Trademark Declaration:
TOTEM TOBOND is registed company trade mark of FOSHAN TOTEM BDG CO.,LTD
TOBOND is the product trade mark of FOSHAN TOTEM BDG CO.,LTD